We're still looking for the perfect video. Got any ideas? Share them with us! Login
Volvo engine code DTC P06B2
5 Volt ACM Sensor Supply: Supply #1 The 5 Volt sensor supplies are located in the Aftertreatment Control Module (ACM). Some sensors require a 5 Volt supply to operate. They are fed by two 5 Volt supplies in the ACM (referred as #1 and #2 below). If the 5 Volt supply fails or is shorted the above/below range monitoring reports. P06B2 ACM Sensor Supply #1: Above Range DTC P06B2 Component / System ACM Sensor Supply #1 Monitor Strategy Description Above range Fault Limit Voltage Sensed > 5.5 V Enable Conditions • Key On Active • Battery Voltage > 8 V Disable Conditions No Active DTC's: • N/A Time Required For DTC To Be Set 5 seconds MIL Illumination 2 Drive Cycles