We're still looking for the perfect video. Got any ideas? Share them with us! Login
Volvo engine code DTC P06B1
5 Volt ACM Sensor Supply: Supply #1 The 5 Volt sensor supplies are located in the Aftertreatment Control Module (ACM). Some sensors require a 5 Volt supply to operate. They are fed by two 5 Volt supplies in the ACM (referred as #1 and #2 below). If the 5 Volt supply fails or is shorted the above/below range monitoring reports. P06B1 ACM Sensor Supply #1: Below Range DTC P06B1 Component / System ACM Sensor Supply #1 Monitor Strategy Description Below range Fault Limit Voltage Sensed < 4.5 V Enable Conditions • Key On Active • Battery Voltage > 8 V Disable Conditions No Active DTC's: • N/A Time Required For DTC To Be Set 5 seconds MIL Illumination 2 Drive Cycles